Repara tus cosas Comunidad Tienda

KitchenAid KSM150PSER Carbon Brushes Replacement

Introducción

If your device is not turning on it could be because of worn down carbon brushes. Here is a guide to replace these brushes.

Qué necesitas

  1. KitchenAid KSM150PSER Carbon Brushes Replacement, Carbon Brushes: paso 1, imagen 1 de 2 KitchenAid KSM150PSER Carbon Brushes Replacement, Carbon Brushes: paso 1, imagen 2 de 2

    • Using a flat head screwdriver, unscrew the brush cap on each side of the mixer by turning them counter clockwise.

    • Remove brush cap by pulling it toward you.

    • The brushes are held in by springs and will fly out if removed too fast.

    Editar

  3. KitchenAid KSM150PSER Carbon Brushes Replacement: paso 2, imagen 1 de 1

    • Remove brush by pulling it toward you.

    • One corner of the brush is flattened. You can check which way the brush is oriented by shining a flashlight inside the hole.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Hayley Young

Miembro Desde 12/03/16

211 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

Cal Poly, Team S2-G5, Livingston Winter 2018 Miembro de Cal Poly, Team S2-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G5

4 Miembros

10 Guías creadas

Un comentario

I’ve been procrastinating on trying to fix my KA mixer on my own…today I did it. The directions were pretty clear and the only thing wrong was that when I had previously cleaned my mixer, I put the carbon brushes in the wrong way. Once I shined a flashlight into the hole I could see where the notched corner went.

Amber Reimer - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 48

Ultimos 30 días: 234

Todo El Tiempo: 14,588