Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert the back of a plastic opening tool into one of the beater holes
-
Apply force to pull the circular plastic part off.
-
If necessary, use the other side of the plastic opening tool to pry the circular plastic part off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #2 screwdriver to remove the two 20mm screws holding the bottom plastic piece in place.
-
Remove the bottom plastic piece using a plastic opening tool.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a Phillips 2 screwdriver, remove the three 20.0mm screws holding the motor assembly in place.
-
Use your hands to remove the motor assembly.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Firmly grip the motor in your hand. Using pliers, pull the connectors off the motors.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lie the motor down flat on a table.
-
Using a pair of tweezers, remove the ring from the plastic knob.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.
3 comentarios
Anyone know of a site that sells replacement beater gears?
try Sears parts.com