Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Inserta una herramienta de apertura de plástico entre el panel plástico como se muestra en el dispositivo.
-
Usa la herramienta para hacer palanca en el plástico.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use tweezers to pinch in the sides of the vibrator cable and slide it out of its housing.
-
Un comentario
OK, the procedure seems straightforward enough, but you say “no parts required” when you actually *do* need to buy the replacement parts for the pieces that are no longer functioning. Where can you buy these parts?