Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Inserta una herramienta de apertura de plástico entre el panel plástico como se muestra en el dispositivo.
-
Usa la herramienta para hacer palanca en el plástico.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a spudger to push up the black tabs on all three ribbon cables.
-
Once the tabs are open, gently pull the ribbon cables out of their housings.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
There is quite a bit of glue between the screen and the case, So before inserting any opening tool, use plenty of heat to soften the glue.
-
Insert a plastic opening tool into the small crack between the screen and the front panel. Counter-intuitively, start away from the fragile corners and in the middle of a side, near the touch buttons.
-
Work your way around the screen until you can pry it all the way open.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once the screen is free of the front panel, pull the loose ribbon cables through the openings in the bottom of the screen.
-
Lift the screen off of the front panel.
-
Cancelar: No complete esta guía.
10 personas más completaron esta guía.
Equipo
Cal Poly, Team 19-12, Maness Winter 2015 Miembro de Cal Poly, Team 19-12, Maness Winter 2015
CPSU-MANESS-W15S19G12
5 Miembros
8 Guías creadas
24 comentarios
My screen glass is cracked, but the e-ink screen is fine. I found a replacement glass on Amazon, but how can I separate the e-ink display from the glass without destroying it? Is there a replacement piece that contains both?
Did you get anywhere with this John?
dave -
I'm wondering the same thing. How are you guys separating the screen? it's just not coming off. it's crumbing and cracking rather than lifting.
My guess is that the e-ink TFT screen is bonded to the glass digitizer with a UV curing optically clear adhesive. The chance of separating the broken digi and the e-ink part without cracking the TFT are close to impossible. I know they use a very strong thin wire system to separate LCD's on small devices like phones but not sure if the e-ink screen is strong. I have managed to source a couple of recycled working screens complete with digi and e-ink together for some customers. As soon as we have them here and done the repairs, we will experiment on getting one of the damaged ones apart to see if we can replace just the digitizer. REO Technology Ltd. www.reotech.co.uk
Hey folks! i feel like i found the replacement for a broken screen for kindle voyage. I am not sure about links sharing policy here, but if you will google "ED060TC1" you'll find plenty of offers from china. In order not to be screwed by amazon manufacturer uses "Montana" as brand on a front panel. Gonna order one today.
