Saltar al contenido principal

Introducción

Everyone has dropped an electronic device and felt the sinking feeling of picking it up only to find a shattered screen. This guide shows you how to replace the screen on your Kindle Voyage should that ever happen.

  1. Insert a plastic opening tool between the plastic panel shown on the device. Use the tool to pry the plastic away from the device.
    • Insert a plastic opening tool between the plastic panel shown on the device.

    • Use the tool to pry the plastic away from the device.

    • There will be adhesive holding this piece of plastic to the device. You may have to pull pretty hard to get it separated.

  2. Use an aluminum driver attached with a Phillips head size #00 to remove the four 3mm screws shown in the picture.  For reassembly, note that the top two and bottom two screws are different sizes.
    • Use an aluminum driver attached with a Phillips head size #00 to remove the four 3mm screws shown in the picture. For reassembly, note that the top two and bottom two screws are different sizes.

  3. Once the screws are removed, the back panel can slide off the device. Once the screws are removed, the back panel can slide off the device. Once the screws are removed, the back panel can slide off the device.
    • Once the screws are removed, the back panel can slide off the device.

    Why is step 4 needed? The magnetic component doesn’t appear to be in the way of the battery replacement. Is the magnetic component just sitting on the posts (without screws attaching)? Will any magnet work to remove it? Is there any electrical connection to this component?

    John - Contestar

    There is no electrical connection, it is just sitting there. It should be removed so that it doesn’t fall out during the rest of the repair.

    Merlin04 - Contestar

  4. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  5. Remove the magnetic component with the magnetic head of the aluminum driver. Remove the magnetic component with the magnetic head of the aluminum driver.
    • Remove the magnetic component with the magnetic head of the aluminum driver.

  6. Use a spudger to push up the black tabs on all three ribbon cables. Once the tabs are open, gently pull the ribbon cables out of their housings.
    • Use a spudger to push up the black tabs on all three ribbon cables.

    • Once the tabs are open, gently pull the ribbon cables out of their housings.

  7. Insert a plastic opening tool into the small crack between the screen and the front panel. Work your way around the screen until you can pry it all the way open.
    • Insert a plastic opening tool into the small crack between the screen and the front panel.

    • Work your way around the screen until you can pry it all the way open.

    • There is adhesive holding the screen to the front panel, so you will need to apply some pressure to completely separate the two.

    imposible to do, the sceen breack eat time you try to insert tool in the small crack

    shamseybert - Contestar

  8. Once the screen is free of the front panel, pull the loose ribbon cables through the openings in the bottom of the screen. Lift the screen off of the front panel.
    • Once the screen is free of the front panel, pull the loose ribbon cables through the openings in the bottom of the screen.

    • Lift the screen off of the front panel.

    I pressed down the screen Kindle Voyage. Where can I order a new screen? goldenbek@list.ru

    Altynbek Shalandiyev - Contestar

    Die Bilder vermitteln einen falschen Eindruck! Das Glas ist sehr wohl geklebt - mit einem wiederlich zähem Zeug. Ausserdem sollte man auf der unteren (Kontakt-) Seite beginnen, da dort nur ein schmaler Metallrand mit Kleber versehen ist. Und viel, viel Geduld mitbringen! Der Kleber löst sich so mit 1mm pro Stunde...

    Mark Lauinger - Contestar

    Wo hast du denn deinen neuen display hergehabt? Hast du einen guten gefunden?

    Anika -

    Hi, same problem - i don't know where to buy the replacement screen/lcd-panel for the voyage. any ideas?, best, Axel

    Axel - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Sean Yap

Miembro Desde 22/01/15

961 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 19-12, Maness Winter 2015 Miembro de Cal Poly, Team 19-12, Maness Winter 2015

CPSU-MANESS-W15S19G12

5 Miembros

6 Guías creadas

My screen glass is cracked, but the e-ink screen is fine. I found a replacement glass on Amazon, but how can I separate the e-ink display from the glass without destroying it? Is there a replacement piece that contains both?

John Davis - Contestar

Did you get anywhere with this John?

dave -

I'm wondering the same thing. How are you guys separating the screen? it's just not coming off. it's crumbing and cracking rather than lifting.

Gerald Onyango -

My guess is that the e-ink TFT screen is bonded to the glass digitizer with a UV curing optically clear adhesive. The chance of separating the broken digi and the e-ink part without cracking the TFT are close to impossible. I know they use a very strong thin wire system to separate LCD's on small devices like phones but not sure if the e-ink screen is strong. I have managed to source a couple of recycled working screens complete with digi and e-ink together for some customers. As soon as we have them here and done the repairs, we will experiment on getting one of the damaged ones apart to see if we can replace just the digitizer. REO Technology Ltd. www.reotech.co.uk

Chris Halliwell - Contestar

Hey folks! i feel like i found the replacement for a broken screen for kindle voyage. I am not sure about links sharing policy here, but if you will google "ED060TC1" you'll find plenty of offers from china. In order not to be screwed by amazon manufacturer uses "Montana" as brand on a front panel. Gonna order one today.

ivansaraev - Contestar

Did it work?

crg -

Can you give us an update on compatibility with Amazon Voyage?

Thanks in advance

Chris Halliwell -

yes, the screen is working, however my device seems to be broken... it shows me - "your kindle needs a repair"

ivansaraev -

Did this work for you?

Rob Ellis -

When I opened the black cover in step 1, my touchscreen stopped working. What is the problem and what do i need to do to fix it???

Daniel Zhou - Contestar

I have a replacement screen but i can't separate the old digitizer because of the adhesive. They make it look so easy in this guide but i have all the tools required and i'm taking my time and the screen is just crumbling and not lifting.

Gerald Onyango - Contestar

This is was more difficult than the writer makes it seem. Impossible to get screen off on the basis of these instructions. Out a$30 screen and have to order a new voyage.

Glenn Blasius - Contestar

Same experience here, plus some bloody finger :)

i'll see if somebody on ebay wants to buy what remains, after the first cuts my patience cracked and so did the lcd.

Diego Costantini -

indeed this is not possible as the instructions purport. The e-ink screen is bonded to the protective screen with a very sticky glue. I think it impossible to just replace the protective screen.

bob williamson - Contestar

Yeah, this is pretty much impossible. Screen is tightly bonded to the rest of the body. This guide should either be revised or removed, because it will result in people destroying their device.

aleximaschas - Contestar

This gets the screen replaced, but I don't think it actually fixes the Voyage. Did the author actually put a new screen into a Voyage and make it work?

My attempt, and every one I've found online, winds up with the screen working but saying "Your Kindle needs repair: code 2" which means "beyond hope, buy a new Kindle."

I think that there may be some kind of an issue with a calibration or serial number tie between the screen circuitry and the main board.

It's IMO wrong for iFixit to present this as such an easy fix when in fact, as far as I can tell, it's actually impossible.

John Ridley - Contestar

The screen of my Kindle Voyage cracked, and i am not able to use the touch screen anymore , so i can not enter my books, the menu. A shame because in fact it doesn’t eem to be broken otherwise. I just can not enter my books. Does anyone know how to repair this?

Leonie W - Contestar

WARNING: As far as I can tell as of Fall 2018 you can no longer buy screen replacements. You can be the screed digitizer (front glass) but this is useless because it is permanently attached to the e-ink display. So you can’t just replace the front glass.

Harry Bullen - Contestar

Be careful with the corners!!!!! I just break one of the screen so now it is the full replacement not just the touch sensor.

mlastra - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 15

Últimos 7 Días: 59

Últimos 30 Días: 258

Todo El Tiempo: 18,924