Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Kindle Paperwhite 1st Generation Motherboard Replacement

Introducción

Replace your Kindle's old motherboard with a new one.

Qué necesitas

  1. Kindle Paperwhite 1st Generation Motherboard Replacement, Case: paso 1, imagen 1 de 2 Kindle Paperwhite 1st Generation Motherboard Replacement, Case: paso 1, imagen 2 de 2

    • Using a spudger or plastic opening tool, gently pry the bezel from the screen. It is easier to start in the corners and work your way around the bezel.

    • Do not insert the spudger too far under the bezel; it could easily damage the screen.

    Traducir

  2. Kindle Paperwhite 1st Generation Motherboard Replacement: paso 2, imagen 1 de 3 Kindle Paperwhite 1st Generation Motherboard Replacement: paso 2, imagen 2 de 3 Kindle Paperwhite 1st Generation Motherboard Replacement: paso 2, imagen 3 de 3

    • Remove the eleven 3.0 mm Phillips screws surrounding the midframe.

    • At the top of the display, a strip of black tape covers one screw.

    Traducir

  3. Kindle Paperwhite 1st Generation Motherboard Replacement: paso 3, imagen 1 de 1

    • Lift the midframe out of the case.

    • If the midframe is stuck, slide it to the left first, and then lift it out.

    Traducir

  4. Kindle Paperwhite 1st Generation Motherboard Replacement, Battery: paso 4, imagen 1 de 2 Kindle Paperwhite 1st Generation Motherboard Replacement, Battery: paso 4, imagen 2 de 2

    • Turn over the midframe to locate the battery.

    • Remove the three Phillips 3.0 mm screws securing the battery to the midframe.

    Traducir

  6. Kindle Paperwhite 1st Generation Motherboard Replacement: paso 5, imagen 1 de 1

    • Gently lift the battery from the bottom, and slide it out of the midframe.

    Traducir

  7. Kindle Paperwhite 1st Generation Motherboard Replacement, Motherboard: paso 6, imagen 1 de 3 Kindle Paperwhite 1st Generation Motherboard Replacement, Motherboard: paso 6, imagen 2 de 3 Kindle Paperwhite 1st Generation Motherboard Replacement, Motherboard: paso 6, imagen 3 de 3

    • With the case and battery removed from the midframe, begin removing all cables attached to the motherboard.

    • Place the device so the midframe's backside faces up. Start with the cable on the bottom left corner.

    • Use a spudger to lift up the white locking cable tensioner and slide the flex cable out.

    • Proceed counterclockwise to the next cable and repeat. Small flex cable on the bottom won't need cable tensioner lifted, just carefully pull out.

    Traducir

  8. Kindle Paperwhite 1st Generation Motherboard Replacement: paso 7, imagen 1 de 2 Kindle Paperwhite 1st Generation Motherboard Replacement: paso 7, imagen 2 de 2

    • Remove the white flex cable by gently lifting the yellow plastic connector.

    Traducir

  9. Kindle Paperwhite 1st Generation Motherboard Replacement: paso 8, imagen 1 de 3 Kindle Paperwhite 1st Generation Motherboard Replacement: paso 8, imagen 2 de 3 Kindle Paperwhite 1st Generation Motherboard Replacement: paso 8, imagen 3 de 3

    • Remove the yellow anti-static tape from the display ribbon cable connector.

    • Use a spudger to lift up and disconnect the cable tensioner.

    Traducir

  10. Kindle Paperwhite 1st Generation Motherboard Replacement: paso 9, imagen 1 de 2 Kindle Paperwhite 1st Generation Motherboard Replacement: paso 9, imagen 2 de 2

    • Use a Philips screwdriver to remove the seven 3.0 mm Phillips screws securing the motherboard:

    • Three silver screws with silver washers

    • Two silver screws with no washers

    • One black screw with a golden washer

    • One black screw with a square washer

    Traducir

  11. Kindle Paperwhite 1st Generation Motherboard Replacement: paso 10, imagen 1 de 1

    • Remove the motherboard.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Autor

con 10 otros colaboradores

Isabelle Burgess

Miembro Desde 01/23/13

1,621 Reputación

2 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

Cal Poly, Team 3-33, Amido Winter 2013 Miembro de Cal Poly, Team 3-33, Amido Winter 2013

CPSU-AMIDO-W13S3G33

4 Miembros

17 Guías creadas

2 comentarios

Not sure if this is an error, but on the 3G paperwhite, we needed to use a #0 Phillips, not a #2. Great guide otherwise!

Caleb Begly - Contestar

Please suggest what type of controller is used and the model and flash memory in the Kindle Paperwhite 1st Generation?

ven 1949, div 0004

Elecrash - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 18

Ultimos 30 días: 65

Todo El Tiempo: 20,351