Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Kindle Fire HDX 7" Volume Button Replacement

Introducción

Is your Kindle Fire HDX 7” tablet refusing to get louder or quitter at the push of its buttons? The ribbon cable or buttons may be broken.

Follow this guide to replace them yourself!

Qué necesitas

  1. Kindle Fire HDX 7" Volume Button Replacement, Speaker Bezel: paso 1, imagen 1 de 3 Kindle Fire HDX 7" Volume Button Replacement, Speaker Bezel: paso 1, imagen 2 de 3 Kindle Fire HDX 7" Volume Button Replacement, Speaker Bezel: paso 1, imagen 3 de 3

    • Insert an opening pick underneath the speaker bezel, and slide it along the perimeter to separate it from the tablet.

    • The adhesive is strong and may require an iOpener, or heat gun, to soften.

    Traducir

  2. Kindle Fire HDX 7" Volume Button Replacement: paso 2, imagen 1 de 1

    • Remove the speaker bezel.

    Traducir

  3. Kindle Fire HDX 7" Volume Button Replacement, Rear Panel: paso 3, imagen 1 de 1

    • Remove the six pink 3mm T3 Torx screws from the back case.

    Traducir

  5. Kindle Fire HDX 7" Volume Button Replacement: paso 4, imagen 1 de 2 Kindle Fire HDX 7" Volume Button Replacement: paso 4, imagen 2 de 2

    • Wedge opening picks around the perimeter between the display and back case.

    • Work the opening picks around the perimeter until the two halves disengage from each other.

    • Don't completely separate as the display ribbon cable still connects the two.

    Traducir

  6. Kindle Fire HDX 7" Volume Button Replacement: paso 5, imagen 1 de 1

    • Use the flat end of a spudger to pry up and disconnect the rear panel press-fit connector from the motherboard.

    Traducir

    • There may be a glue strip between the battery and the outside case. Gently pry the case open and use the flat end of a spudger to separate the glue strip.

    Traducir

  8. Kindle Fire HDX 7" Volume Button Replacement, Volume Button: paso 7, imagen 1 de 1

    • Remove the two 2.1mm T5 Torx screws from the volume button retaining bracket.

    Traducir

  9. Kindle Fire HDX 7" Volume Button Replacement: paso 8, imagen 1 de 2 Kindle Fire HDX 7" Volume Button Replacement: paso 8, imagen 2 de 2

    • Pry up the volume button ribbon cable from the rear panel with the flat end of a spudger.

    • Pull up on the volume button ribbon cable to remove it from the tablet.

    Traducir

  10. Kindle Fire HDX 7" Volume Button Replacement: paso 9, imagen 1 de 1

    • Remove the volume button from the rear panel.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

Blake Klein

Miembro Desde 01/29/17

70,510 Reputación

50 Guías creadas

Insignias: 43

+ 40 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 13

Todo El Tiempo: 1,638