Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

  1. Open up the device by using a plastic opening tool in order to avoid damaging the device. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.
    • Open up the device by using a plastic opening tool in order to avoid damaging the device.

    • To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.

  2. There are (4) 3mm T4 Torx screws between both speakers (two each). Remove the ones necessary for whichever speaker needs to be replaced. There are (4) 3mm T4 Torx screws between both speakers (two each). Remove the ones necessary for whichever speaker needs to be replaced. There are (4) 3mm T4 Torx screws between both speakers (two each). Remove the ones necessary for whichever speaker needs to be replaced.
    • There are (4) 3mm T4 Torx screws between both speakers (two each). Remove the ones necessary for whichever speaker needs to be replaced.

  3. SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación

    SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación
  4. After the screws are removed, locate the wire, follow it to where it connects to the main device, and pull up gently until it disconnects. After the screws are removed, locate the wire, follow it to where it connects to the main device, and pull up gently until it disconnects. After the screws are removed, locate the wire, follow it to where it connects to the main device, and pull up gently until it disconnects.
    • After the screws are removed, locate the wire, follow it to where it connects to the main device, and pull up gently until it disconnects.

  5. Remove (2) 3mm T4 Torx screws from the bottom speaker. Remove (2) 3mm T4 Torx screws from the bottom speaker.
    • Remove (2) 3mm T4 Torx screws from the bottom speaker.

  6. Same as Step 3, after the screws are removed, follow the wire to where it connects and pull up gently until it disconnects. Same as Step 3, after the screws are removed, follow the wire to where it connects and pull up gently until it disconnects.
    • Same as Step 3, after the screws are removed, follow the wire to where it connects and pull up gently until it disconnects.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

aaa

Miembro Desde 06/10/16

705 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 2-3, Sullivan Fall 2016 Miembro de USF Tampa, Team 2-3, Sullivan Fall 2016

USFT-SULLIVAN-F16S2G3

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 266