Skip to main content
  1. Open up the device by using a plastic opening tool in order to avoid damaging the device. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.
    • Open up the device by using a plastic opening tool in order to avoid damaging the device.

    • To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.

  2. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  3. Locate the battery's power ribbon. Use nylon spudger to disconnect the ribbon from the mother board.
    • Locate the battery's power ribbon.

    • Use nylon spudger to disconnect the ribbon from the mother board.

  4. Peel battery away. Battery is glued and may cause permanent damage if bent.
    • Peel battery away.

    • Battery is glued and may cause permanent damage if bent.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

aaa

Miembro Desde 06/10/16

671 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 2-3, Sullivan Fall 2016 Miembro de USF Tampa, Team 2-3, Sullivan Fall 2016

USFT-SULLIVAN-F16S2G3

4 Miembros

5 Guías creadas

Añadir comentario

Ver Estadísticas:

Past 24 Hours: 3

Past 7 Days: 20

Past 30 Days: 92

Global: 2,815