Repara tus cosas Comunidad Tienda

Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 3 : paso 1, imagen 2 de 3 : paso 1, imagen 3 de 3

    • Wedge a plastic opening tool into the lower right corner of the Kindle Fire.

    • Pry the case apart and run the plastic opening tool along the perimeter of the Kindle Fire to release the clips securing the case halves to each other.

    • If you are having extreme difficulty inserting the plastic opening tool, carefully use a metal spudger to undo the first clip, then switch back to the opening tool to avoid scratching your case.

    • It is helpful to pry the bottom of the Kindle Fire away (and out from the side) from the top part. Exerting too much force attempting to split the two without pulling away can cause the tabs on the inside to crack.

    Traducir

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 1

    • Once you have freed all the plastic clips, pull the back case off the Kindle Fire.

    Traducir
Linea de Meta

14 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Phillip Takahashi

Miembro Desde 08/22/11

86,704 Reputación

87 Guías creadas

Insignias: 43

+ 40 más insignias

3 comentarios

Simple to follow instructions .

Eric Rester - Contestar

where to buy the base panel for my kindle fire 7 tablet

Senthilvel Murugesan - Contestar

I was wondering why my kindle case was opening/separating and it was not charging. I opened the case per you instructions and found that the battery has expanded inside ITS case! I hope to be able to get another battery cheaply. Thank you for your help!!

Ellen De - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 22

Ultimos 30 días: 61

Todo El Tiempo: 15,946