Introducción
La pantalla del Kindle 4 se rompió. No se debería ver la rotura de la pantalla, pero media pantalla esta congelada y no funciona. Hemos pedido una nueva pantalla de aliexpress
Qué necesitas
-
-
Quita la placa trasera del kindle.
-
Empieza abriendo la parte trasera en los lados. Empuja tu navaja o pinzas un poco más profundo en el centro y gíralas para empujar la cubierta pegada fuera del marco. No hagas esto cerca del botones laterales ya que podrías cortar el cable plano de los botonoes.
-
Mira este video desde el 0:33 hasta el 2:00. No sigas mas adelante ya que no necesitas cada paso de este video para reemplazar la pantalla.
-
-
-
Levanta la pestaña negra del conector de la batería y luego extrae el cable con cuidado.
-
-
-
Ahora el lado trasero esta abierto, desconecta el cable de la pantalla de la tarjeta madre como se hace en este video desde 3:14 hasta 3:21. Nuevamente no sigas los siguientes pasos del video ya que no los necesitamos para reemplazar la pantalla.
-
-
-
-
Retira la cubierta frontal como se muestra en este video desde 4:11 hasta 4:48.
-
Nuevamente no sigas mas el video ya que no necesitamos esos pasos para reemplazar la pantalla.
-
-
-
Empieza desde los lados y rompe la pantalla pieza por pieza empujando pinzas entre el bisel y la pantalla. El pegamento se afloja fácilmente si calientas la pantalla con una secadora de cabello.
-
-
-
Este es el paso mas tedioso, Retira el pegamento y pequeños trozos de cristal pegados al bisel. No se tiene que retirar todo el pegamento, pero el cristal tiene que irse. Puedes raspar el pegamento con una navaja (navaja de afeitar es lo mas conveniente, pero un cuchillo regular funciona también) o usa ayuda de algunos solventes.
Steps 5 & 6 are a pain in the butt, yes. It took me several hours to remove all the glass, but everything else was easy and I managed to change the screen without problems :)
-
-
-
Coloca la pantalla nueva en su lugar.
-
Asegúrate que el conector se pegue al bisel.
-
Conecta el conector a la tarjeta madre.
-
Prueba la conexión encendido el dispositivo.
-
-
-
Engancha la cubierta trasera y frontal de vuelta.
-
Esta guía te ayudara a abrir el Kindle, quitar la pantalla vieja, remplazarla por una nueva y volver a cerrar el Kindle
Esta guía te ayudara a abrir el Kindle, quitar la pantalla vieja, remplazarla por una nueva y volver a cerrar el Kindle
Cancelar: No complete esta guía.
16 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
17 comentarios
Mine was around €20 incl shipping: https://nl.aliexpress.com/item/LCD-Displ...
having a really hard time with breaking the screen, any advice beyond what you've posted? what tools do you recommend?
I just used a kitchen knife and a blow dryer. It is definitely the most time consuming part. Good luck!
I've bought ED060SCN LF instead of ED060SCF LF will it work? it is for kindle 5 but seller wrote it is good for Kindle 4 too... might be a good idea to uplug old screen and plug new in just for powering up before start removing the old imho, I will check..
I have no idea, I guess it its worth a try!
Followed the instructions and everything went ok. Removing the screen was very hard and I advise people doing it to take precautions with the glass as it will most likely spray all over. What I did what to cover the screen in transparent tape, so that the glass wouldn’t jump all over. I also wore gloves and protective eye gear.
Hi. I have cleaned all the glue from the bezel. I haven't ordered a screen yet so before I order it I just want to know if the new screen comes with glue or how do you put it on.
Make sure you have a completely flat area, any bits of glass left will create a pivot point under the new glass. Buy thin double sided tape, 25mm width is good and apply to the back up f the chassis. Obviously check your replacement screen works before applying the adhesive.
Hi, I didn't use any glue or tape and it still works perfectly after one year and a half ;-)
Thanks Francis - just completed my replacement. All worked out well!
the only issue that remains is the quality of the image. It seems like the replacement screen is not of the best quality and so there are ghost images left once in a while. It was fun though doing the repair - for sure the worst thing is removing the screen. A pain in @#$%!
Raul
My advice would be to remove everything with the possible exception of the battery, as you will likely destroy it in the process, before removing the screen. If you're replacing the battery as well then obviously remove this too. Dont try to peel off the page turn ribbons as you will likely damage them.
Cleaning the glass fragments and glue is best done with “nitro" thinners ot “acetone" however “acetone WILL MELT the plastic if you get it on it therefore “nitro" is better or 90 -100% alcohol at a push.
Stick the screen back on with the thinnest twin stick you can find.
Works well, but breaking the screen is awkward and time consuming. Price of a new screen is around 20 Euros at aliexpress, and it takes about 1 hr to do the whole replacement. To put everything back in place I used double-sided tape. Easy to use but you need to be a bit more meticulous in removing the old glue.
Steps 5 & 6 are a pain in the butt, yes. It took me several hours to remove all the glass, but everything else was easy and I managed to change the screen without problems :)
Do not remove back cover before Step 4! You might break clips! Start with front cover and you will be able to safely free them.
Viktar Simanenka - Contestar