Saltar al contenido principal

KidzLane Walkie-Talkie Press-to-speak button Replacement

Qué necesitas

  1. KidzLane Walkie-Talkie Press-to-speak button Replacement, Press-to-speak button: paso 1, imagen 1 de 1
    • Place the Walkie-Talkie on a flat surface-preferably a table or a desk.

    • Flip the device over to where you see four screws in each corner.

    • Make sure you take out the batteries before proceeding.

  2. KidzLane Walkie-Talkie Press-to-speak button Replacement: paso 2, imagen 1 de 2 KidzLane Walkie-Talkie Press-to-speak button Replacement: paso 2, imagen 2 de 2
    • Using your Phillips head screwdriver, unscrew all four 4mm screws from each corner.

  3. KidzLane Walkie-Talkie Press-to-speak button Replacement: paso 3, imagen 1 de 1
    • Once you have unscrewed all four corners, open the device so it will be in two parts.

    • As you're opening the inside of the Walkie-Talkie, don't break off any wires within the device.

    • Taking the Phillips head screwdriver again, unscrew the three screws on the circuit board (green plate).

    • Separate these screws from the other four since they are different sizes.

  4. KidzLane Walkie-Talkie Press-to-speak button Replacement: paso 4, imagen 1 de 2 KidzLane Walkie-Talkie Press-to-speak button Replacement: paso 4, imagen 2 de 2
    • Take the circuit board out of the plastic casing.

    • Use the soldering device to iron the silver box (press-to-speak button), and then remove it from the circuit board.

Linea de Meta

2 personas más completaron esta guía.

Amin

Miembro Desde 02/13/16

642 Reputación

5 Guías creadas

Equipo

IUPUI, Team 1-1, Wilson Spring 2016 Miembro de IUPUI, Team 1-1, Wilson Spring 2016

IUPUI-WILSON-S16S1G1

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 9

Todo El Tiempo: 896