Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Kid Galaxy Morphibians Explorer Axle Replacement

Qué necesitas

  1. Kid Galaxy Morphibians Explorer Axle Replacement, Axle: paso 1, imagen 1 de 1
    • Remove both 8.0 mm Phillips #1 screws, one for each wheel.

  2. Kid Galaxy Morphibians Explorer Axle Replacement: paso 2, imagen 1 de 1
    • Remove the wheels by pulling them away from the RC car.

  3. Kid Galaxy Morphibians Explorer Axle Replacement: paso 3, imagen 1 de 1
    • Make note of where each driving gear cover is placed. They only go in one way.

    • Remove the eight 8.0mm Phillips #00 screws, two screws for each wheel.

  4. Kid Galaxy Morphibians Explorer Axle Replacement: paso 4, imagen 1 de 1
    • Pry open the two gear covers on both sides.

  5. Kid Galaxy Morphibians Explorer Axle Replacement: paso 5, imagen 1 de 1
    • Pull the driving gears off the axles by sliding them off the axles and exposing both axles.

  6. Kid Galaxy Morphibians Explorer Axle Replacement: paso 6, imagen 1 de 1
    • Slide both axles from the internal axles guides within the car.

    • Reverse the steps to replace the axles.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

USF Tampa, Team 1-2, Hickman Fall 2014 Miembro de USF Tampa, Team 1-2, Hickman Fall 2014

USFT-HICKMAN-F14S1G2

3 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 268