Repara tus cosas Comunidad Tienda

Keyboard

Qué necesitas

  1. Keyboard, Keyboard: paso 1, imagen 1 de 1

    • Before proceeding, power down your Laptop and remove the power cable.

    • Put your computer in front of you and open up the display.

    Editar

  2. Keyboard: paso 2, imagen 1 de 1

    • When you've opened up the display. Remove this panel with a spudger as shown in this picture. Do it like that on the other side too until the panel clicks open.

    Editar

  4. Keyboard: paso 3, imagen 1 de 1

    • When you've done everything correct, you should see a view like this.

    Editar

  5. Keyboard: paso 4, imagen 1 de 1

    • After the previous step, try to put the spudger in between the keyboard and the plastic frame. Then the pins holding it in should click.

    Editar

  6. Keyboard: paso 5, imagen 1 de 1

    • When pushing the keyboard try to be careful cause underneath, the keyboard is connected to the motherboard with a ribbon cable.

    • After the previous step there are 4 more plastic pins, for these you can just slide the keyboard out of these.

    Editar

  7. Keyboard: paso 6, imagen 1 de 1

    • Be careful when unplugging the ribbon cable from the motherboard.

    • If you need to replace they keyboard and nothing else now is the time to do so.

    • With a spudger remove the ribbon cable from the motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Regome

Miembro Desde 01/20/23

767 Reputación

7 Guías creadas

Insignias: 7

+ 4 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 63