Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the missing key onto the keyboard in the desired orientation. Once aligned, press firmly until the key snaps into place. This will not require large amounts of force. If it does not snap in, realign the key and try again.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Large rectangular keys need to be attached to the small metal bar to be attached properly. There are two ways to do this.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Before installing, the plastic receivers on the on the bottom of key need to be lined up properly with the metal pins.
-
Option one is to line up the receivers with the metal bar from step 2 and apply pressure to attach.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the metal bar gently from one side to unseat it from the keyboard and allow it to be removed.
-
Attach the metal bar to the receivers on the back of the key.
-
Seat the metal bar into the hole on one side, and then the other. Then press firmly to attach the key.
-
Cancelar: No complete esta guía.
5 personas más completaron esta guía.