Saltar al contenido principal

Keurig K55 Water Filter Replacement

Qué necesitas

  1. Keurig K55 Water Filter Replacement, Charcoal water filter: paso 1, imagen 1 de 1
    • Soak the new charcoal filter in water for 5 minutes.

  2. Keurig K55 Water Filter Replacement: paso 2, imagen 1 de 3 Keurig K55 Water Filter Replacement: paso 2, imagen 2 de 3 Keurig K55 Water Filter Replacement: paso 2, imagen 3 de 3
    • Remove the water reservoir from the Keurig machine by gently lifting up on the reservoir and pulling it away.

  3. Keurig K55 Water Filter Replacement: paso 3, imagen 1 de 1
    • Remove the lid from the water reservoir and empty any remaining water from the tank.

  4. Keurig K55 Water Filter Replacement: paso 4, imagen 1 de 2 Keurig K55 Water Filter Replacement: paso 4, imagen 2 de 2
    • Remove water filter holder from within the water reservoir by pulling up on the holder and lifting it out.

  5. Keurig K55 Water Filter Replacement: paso 5, imagen 1 de 2 Keurig K55 Water Filter Replacement: paso 5, imagen 2 de 2
    • To remove the old filter, pinch both sides of the filter holder at the base and pull it apart. Remove the old filter by lifting it out of the filter holder.

    • Dispose of old water filter cartridge.

  6. Keurig K55 Water Filter Replacement: paso 6, imagen 1 de 1
    • Take the soaked water filter and rinse it under running water for 60 seconds.

  7. Keurig K55 Water Filter Replacement: paso 7, imagen 1 de 2 Keurig K55 Water Filter Replacement: paso 7, imagen 2 de 2
    • Place new water filter cartridge into the upper filter holder.

    • Snap the bottom of the filter holder back on by aligning the tabs with the spaces

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 25

Todo El Tiempo: 1,070