Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Keurig B70 Platinum Brewer Handle Replacement

Qué necesitas

  1. Keurig B70 Platinum Brewer Handle Replacement, Brewer Handle: paso 1, imagen 1 de 3 Keurig B70 Platinum Brewer Handle Replacement, Brewer Handle: paso 1, imagen 2 de 3 Keurig B70 Platinum Brewer Handle Replacement, Brewer Handle: paso 1, imagen 3 de 3
    • Turn off and unplug the Keurig before starting.

    • Lay the Keurig on its back and open the lid.

    • Using a Phillips #2 screwdriver, remove the two 21.0 mm screws.

    • Be careful when removing the screws. There is a sharp puncture needle!

    • You may need to use tweezers to get the screws out.

  2. Keurig B70 Platinum Brewer Handle Replacement: paso 2, imagen 1 de 2 Keurig B70 Platinum Brewer Handle Replacement: paso 2, imagen 2 de 2
    • Using a T15 Torx screwdriver, remove the two 29.0 mm screws on each ends of the handle.

  3. Keurig B70 Platinum Brewer Handle Replacement: paso 3, imagen 1 de 2 Keurig B70 Platinum Brewer Handle Replacement: paso 3, imagen 2 de 2
    • Lift and pull the black plastic cover away from the Keurig.

  4. Keurig B70 Platinum Brewer Handle Replacement: paso 4, imagen 1 de 1
    • Push the handle back and upward to detach it from the Keurig.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Thu Hoang

Miembro Desde 10/17/18

217 Reputación

2 Guías creadas

Equipo

UW Tacoma, Team S1-G6, Rose Fall 2018 Miembro de UW Tacoma, Team S1-G6, Rose Fall 2018

UWT-ROSE-F18S1G6

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 4

Todo El Tiempo: 439