Saltar al contenido principal

Keurig B70 Platinum Brewer Handle Replacement

Qué necesitas

  1. Keurig B70 Platinum Brewer Handle Replacement, Brewer Handle: paso 1, imagen 1 de 3 Keurig B70 Platinum Brewer Handle Replacement, Brewer Handle: paso 1, imagen 2 de 3 Keurig B70 Platinum Brewer Handle Replacement, Brewer Handle: paso 1, imagen 3 de 3
    • Turn off and unplug the Keurig before starting.

    • Lay the Keurig on its back and open the lid.

    • Using a Phillips #2 screwdriver, remove the two 21.0 mm screws.

    • Be careful when removing the screws. There is a sharp puncture needle!

    • You may need to use tweezers to get the screws out.

  2. Keurig B70 Platinum Brewer Handle Replacement: paso 2, imagen 1 de 2 Keurig B70 Platinum Brewer Handle Replacement: paso 2, imagen 2 de 2
    • Using a T15 Torx screwdriver, remove the two 29.0 mm screws on each ends of the handle.

  3. Keurig B70 Platinum Brewer Handle Replacement: paso 3, imagen 1 de 2 Keurig B70 Platinum Brewer Handle Replacement: paso 3, imagen 2 de 2
    • Lift and pull the black plastic cover away from the Keurig.

  4. Keurig B70 Platinum Brewer Handle Replacement: paso 4, imagen 1 de 1
    • Push the handle back and upward to detach it from the Keurig.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Thu Hoang

Miembro Desde 10/17/18

217 Reputación

2 Guías creadas

Equipo

UW Tacoma, Team S1-G6, Rose Fall 2018 Miembro de UW Tacoma, Team S1-G6, Rose Fall 2018

UWT-ROSE-F18S1G6

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 438