Saltar al contenido principal

Keurig B60 Handle Replacement

Qué necesitas

  1. Keurig B60 Handle Replacement, Handle: paso 1, imagen 1 de 1
    • Lift the handle

  2. Keurig B60 Handle Replacement: paso 2, imagen 1 de 3 Keurig B60 Handle Replacement: paso 2, imagen 2 de 3 Keurig B60 Handle Replacement: paso 2, imagen 3 de 3
    • Locate and remove the two 9.5 mm Torx T15 screws on both sides of the handle.

  3. Keurig B60 Handle Replacement: paso 3, imagen 1 de 2 Keurig B60 Handle Replacement: paso 3, imagen 2 de 2
    • Remove the broken handle and replace with the new one

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Jake Wynn

Miembro Desde 04/11/16

830 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 1-7, Maness Spring 2016 Miembro de Cal Poly, Team 1-7, Maness Spring 2016

CPSU-MANESS-S16S1G7

5 Miembros

5 Guías creadas

3 comentarios

The handle is locked up, partially ajar. Inserted a k-cup and handle locked when I was pulling it down

Meme Hill - Contestar

Handle is locked in a partial open position. I raised handle, inserted-cup and when the handle

was pulled down it locked halfway down and does not move

Meme Hill - Contestar

I also have a similar problem as Meme Hill, where the k cup area jostles and jams to an awkward position when moving the handle up (it cannot go up all the way), and it prevents full access to k cup, but I don't know why or what is preventing proper operation of handle swing. My current work around is keep on trying opening and closing, and eventually the handle can open all the way, and the k-cup area part swings out, but it really annoying. It should be accessible the first time when putting the handle up.

Lisa Munn - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 30

Todo El Tiempo: 2,288