Saltar al contenido principal

Kenwood KMM-BT522HD Button Replacement

Qué necesitas

  1. Kenwood KMM-BT522HD Button Replacement, Face Plate: paso 1, imagen 1 de 1
    • Press the ejection button on the lower left corner of the face plate.

  2. Kenwood KMM-BT522HD Button Replacement: paso 2, imagen 1 de 2 Kenwood KMM-BT522HD Button Replacement: paso 2, imagen 2 de 2
    • Remove the face plate by pulling upwards and in the direction of the ejection button.

  3. Kenwood KMM-BT522HD Button Replacement, LCD Screen: paso 3, imagen 1 de 1
    • Remove the three 7.5mm Phillips #1 screws.

  4. Kenwood KMM-BT522HD Button Replacement: paso 4, imagen 1 de 2 Kenwood KMM-BT522HD Button Replacement: paso 4, imagen 2 de 2
    • Separate the two halves of the housing by prying along the length of the device with a plastic opening tool.

  5. Kenwood KMM-BT522HD Button Replacement: paso 5, imagen 1 de 1
    • Remove the motherboard from the housing.

  6. Kenwood KMM-BT522HD Button Replacement, Buttons: paso 6, imagen 1 de 2 Kenwood KMM-BT522HD Button Replacement, Buttons: paso 6, imagen 2 de 2
    • Remove the 5.5 mm Phillips #00 screw.

    • Remove the clear plastic piece by carefully prying it away from the plastic housing.

  7. Kenwood KMM-BT522HD Button Replacement: paso 7, imagen 1 de 2 Kenwood KMM-BT522HD Button Replacement: paso 7, imagen 2 de 2
    • Remove the gray rubber piece by pulling it upwards and away from the plastic housing.

    • Use the pointed end of a spudger to pry out the buttons.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Andrew Waldon

Miembro Desde 07/05/18

265 Reputación

3 Guías creadas

Equipo

IUPUI, Team S2-G4, Harley Summer 2018 Miembro de IUPUI, Team S2-G4, Harley Summer 2018

IUPUI-HARLEY-SU18S2G4

3 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 7

Todo El Tiempo: 230