Introducción

The speaker ear-pads on the Kensington Hi-Fi Headphones 33137 provide comfort for the user when listening to the headphones. This guide shows how to remove these components.

Herramientas

No se requieren herramientas.

Partes

No se requieren partes.

  1. Starting with the left speaker first, pull out one side of the speaker clamp where the clamp enters the hole on the speaker cover.
    • Starting with the left speaker first, pull out one side of the speaker clamp where the clamp enters the hole on the speaker cover.

    • Do not pull out the speaker clamp with too much force, or it may break.

    • After one side of the speaker clamp is removed from the speaker cover, pull the other side of the speaker clamp out.

    Agregar Comentario

  2. Repeat the process in Step 1 to remove the right speaker clamp.
    • Repeat the process in Step 1 to remove the right speaker clamp.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Hold the speaker cover in one hand and the speaker ear-padding in the other.

    • Turn the speaker cover counter-clockwise until it stops turning.

    • Pull the speaker cover and the speaker ear padding apart to expose the inner components of the speaker.

    • Make sure to pull the speakers apart gently to avoid disconnecting the speaker cable wires from the speaker.

    • If the speaker cover and ear-padding don't easily come apart, then make sure the speaker cover is fully turned.

    • Repeat this process for both speakers.

    Hey could you respond to me ask quickly as you can please how do you put it back on?

    dewer - Contestar

    Hi but i’m in a sticky situation how do you put it back on please help me

    dewer - Contestar

    • After the speaker cover has been removed, hold the edge of the speaker ear-pad with fingers.

    • Gently pull the edge of the speaker ear-pad around the edge of the speaker.

    • To avoid tearing the speaker ear-pad, don't use too much force when pulling it around the edge of the speaker.

    • Repeat this process for the other speaker ear-padding.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

William Sanders

Miembro Desde 26/03/14

573 Reputación

5 Guías creadas

Equipo

Clemson, Team 1-3, Benson Spring 2014 Miembro de Clemson, Team 1-3, Benson Spring 2014

CLEM-BENSON-S14S1G3

3 Miembros

9 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 5

Todo El Tiempo: 437