Repara tus cosas Comunidad Tienda

KYVOL CYBOVAC E20 Main Brush Replacement

Introducción

The Kyvol Cybovac E20 has a main rolling brush that may stop functioning over time from use. The brush should be taken out and cleaned, but if this does not work, the brush may be broken. If your vacuum is not cleaning well, use this guide to replace a broken main brush.

  1. KYVOL CYBOVAC E20 Main Brush Replacement, Main Brush: paso 1, imagen 1 de 1

    • Turn vacuum off and lay on flat surface.

    Editar

  2. KYVOL CYBOVAC E20 Main Brush Replacement: paso 2, imagen 1 de 2 KYVOL CYBOVAC E20 Main Brush Replacement: paso 2, imagen 2 de 2

    • Turn vacuum over and identify the main brush compartment.

    Editar

  4. KYVOL CYBOVAC E20 Main Brush Replacement: paso 3, imagen 1 de 1

    • Take off the orange cover guarding the brush

    Editar

  5. KYVOL CYBOVAC E20 Main Brush Replacement: paso 4, imagen 1 de 1

    • Remove the main brush from the vacuum by pulling it out.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 139