Repara tus cosas Comunidad Tienda

KYVOL CYBOVAC E20 Front Bumper Replacement

Introducción

The Kyvol Cybovac E20 contains a front bumper with sensors to prevent the vacuum from hitting walls or furniture. This bumper can become obstructed by debris, so try cleaning it before anything else. If the problem persists, use this guide to replace the broken front bumper.

Qué necesitas

  1. KYVOL CYBOVAC E20 Front Bumper Replacement, Front Bumper: paso 1, imagen 1 de 1

    • Start with the vacuum on a flat surface.

    • The power button should be on the side closest to you.

    Editar

  3. KYVOL CYBOVAC E20 Front Bumper Replacement: paso 2, imagen 1 de 2 KYVOL CYBOVAC E20 Front Bumper Replacement: paso 2, imagen 2 de 2

    • Flip the vacuum over so the bottom is facing up.

    • The dust bin should be on the side furthest from you.

    • Remove the eight 1 mm screws holding the bumper in place using a Phillips #00 screwdriver.

    Editar

  4. KYVOL CYBOVAC E20 Front Bumper Replacement: paso 3, imagen 1 de 2 KYVOL CYBOVAC E20 Front Bumper Replacement: paso 3, imagen 2 de 2

    • Remove both sides of the bumper and replace with new ones.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 12

Todo El Tiempo: 225