Saltar al contenido principal

Introducción

These instructions will demonstrate how to remove the front LCD screen from the KDDI Kyocera A5521K.

  1. Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone. Beneath the covers are screws. Beneath the covers are screws.
    • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

    • Beneath the covers are screws.

  2. Remove the screws using a Y0 screwdriver.
    • Remove the screws using a Y0 screwdriver.

  3. Use the iPod pry tool to remove the outer screen. Two screws are now visible. Be careful not to crack the screen upon removal.  It is adhered strongly to the phone.
    • Use the iPod pry tool to remove the outer screen.

    • Two screws are now visible.

    • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

  4. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  5. Use the Y0 screwdriver to remove the screws.
    • Use the Y0 screwdriver to remove the screws.

  6. Use the iPod pry tool to loosen the faceplate from the phone. Slide the pry tool along the entire crease of the faceplate to completely detach it.
    • Use the iPod pry tool to loosen the faceplate from the phone.

    • Slide the pry tool along the entire crease of the faceplate to completely detach it.

  7. Separate the faceplate from the phone. Separate the faceplate from the phone. Separate the faceplate from the phone.
    • Separate the faceplate from the phone.

  8. Rotate the phone 180 degrees. Grab the flexible circuit with tweezers (or use your fingers if you can manage a firm grip). Pull the flexible circuit to towards you to separate the front LCD screen from the phone.
    • Rotate the phone 180 degrees.

    • Grab the flexible circuit with tweezers (or use your fingers if you can manage a firm grip).

    • Pull the flexible circuit to towards you to separate the front LCD screen from the phone.

  9. Firmly pull the flexible circuit from the connector. Be careful not to damage the flexible circuit. The front LCD screen should now be separate from the phone.
    • Firmly pull the flexible circuit from the connector.

    • Be careful not to damage the flexible circuit.

    • The front LCD screen should now be separate from the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

Miembro Desde 15/04/10

157 Reputación

10 Guías creadas

Equipo

Cal Poly, Team 28-25, Regan Spring 2010 Miembro de Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Miembros

20 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,271