Repara tus cosas Comunidad Tienda

Jensen JTA-230 Volume Knob Replacement

Introducción

The volume knob controls the noise intensity and quality of the music being played. The replacement is easy and requires no tools because the knob is not permanently attached to the device.

  1. Jensen JTA-230 Volume Knob Replacement, Volume Knob: paso 1, imagen 1 de 1

    • Carefully place on a table where it will hold a lot of pressure

    Editar

  3. Jensen JTA-230 Volume Knob Replacement: paso 2, imagen 1 de 1

    • Next, using your thumb and finger, get a good grasp on the volume knob, and carefully but forcefully pull on it and it will pop off.

    Editar

  4. Jensen JTA-230 Volume Knob Replacement: paso 3, imagen 1 de 1

    • Next, take your new volume knob and simply pop it back into place the same way you took the old one off, and you are good to go.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Louis Varrichione

Miembro Desde 03/11/16

309 Reputación

2 Guías creadas

Insignias: 15

+ 12 más insignias

Equipo

UMass Dartmouth, Team 8-8, Botvin Spring 2016 Miembro de UMass Dartmouth, Team 8-8, Botvin Spring 2016

UMASSD-BOTVIN-S16S8G8

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 8

Todo El Tiempo: 459