Jazz UltraTab C1059-HL Headphone Jack Replacement

Introducción

This guide will demonstrate how to effectively remove and replace the headphone jack. This replacement will take 15-20 minutes. However, if the guide is followed to the letter, the task will be accomplished with minimal damage to the device.

Qué necesitas

Paso 1 Headphone Jack

Jazz UltraTab C1059-HL Headphone Jack Replacement, Headphone Jack: paso 1, imagen 1 de 1

Use a Philips screwdriver to remove the four screws: two at the top and two at the bottom of the device.

Editar

Paso 2

Place the device screen down on the table and use a pry tool to remove the back panel.

Editar

Paso 3

For your safety, remove the battery.
Using a solder iron, remove the wires connecting the battery to the motherboard.

Editar

Paso 4

Remove the screw attaching the motherboard to the back panel. Gently remove the motherboard.

Editar

Paso 5

The headphone jack is attached to the motherboard, so the whole thing must be replaced.
With the new mother board, use these steps in reverse to reassemble the device.

Editar