Saltar al contenido principal

Jabra Speak 510 Outer Casing Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. Jabra Speak 510 Outer Casing Replacement, Outer Casing: paso 1, imagen 1 de 2 Jabra Speak 510 Outer Casing Replacement, Outer Casing: paso 1, imagen 2 de 2
    • Using a metal spudger, peel back the foam pad on the bottom of the device to reveal six screws.

  2. Jabra Speak 510 Outer Casing Replacement: paso 2, imagen 1 de 1
    • Remove the six 20 mm T6 screws from the bottom of the device.

  3. Jabra Speak 510 Outer Casing Replacement: paso 3, imagen 1 de 2 Jabra Speak 510 Outer Casing Replacement: paso 3, imagen 2 de 2
    • Remove the back plate and the grey foam underneath.

  4. Jabra Speak 510 Outer Casing Replacement: paso 4, imagen 1 de 3 Jabra Speak 510 Outer Casing Replacement: paso 4, imagen 2 de 3 Jabra Speak 510 Outer Casing Replacement: paso 4, imagen 3 de 3
    • Use a small, pointed metal spudger to release the plastic tabs connecting the faceplate to the bottom of the speaker.

    • A small cable connects the faceplate to the device. Carefully disconnect the cable before fully opening the device.

    • Slowly flip the device open like a clam shell.

    • There are several wires soldered to the motherboard that prevent the faceplate from detaching completely.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jordan Murphy

Miembro Desde 02/16/16

717 Reputación

3 Guías creadas

Equipo

IUPUI, Team 2-3, Harley Spring 2016 Miembro de IUPUI, Team 2-3, Harley Spring 2016

IUPUI-HARLEY-S16S2G3

4 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 136