Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

The JD Razor 2000 scooter features two soft-grip handle bars that are each attached to the T-Bar by a fastening button as well as a continuous string with stoppers at each end. This guide will show how to replace a handle bar.

Partes

No se especificaron partes.

  1. Firmly hold the handle bar in place. Grab with one hand the black removable tip of the handle bar and pull it out. Pull out the end of the tied string through the removable tip.
    • Firmly hold the handle bar in place.

    • Grab with one hand the black removable tip of the handle bar and pull it out.

    • Pull out the end of the tied string through the removable tip.

  2. Untie the knot at the end of the string. If you let go of the string while its in tension, it may recoil far into the other side of the handle bars.  To avoid this, bring the end of the string inward towards the hollow section of the handle bar and then carefully let it go.
    • Untie the knot at the end of the string.

    • If you let go of the string while its in tension, it may recoil far into the other side of the handle bars. To avoid this, bring the end of the string inward towards the hollow section of the handle bar and then carefully let it go.

  3. Press down firmly on the golden fastening button located on the handle bar being replaced. While still pressing down on the fastening button, slide the handle bar apart from the T Bar.
    • Press down firmly on the golden fastening button located on the handle bar being replaced.

    • While still pressing down on the fastening button, slide the handle bar apart from the T Bar.

    • When re-installing the handlebar (after completion of the guide), you may need a pair of needle-nosed pliers to thread the string back through the handlebar.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Kevin Church

Miembro Desde 16/10/14

297 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 4-46, Amido Fall 2014 Miembro de Cal Poly, Team 4-46, Amido Fall 2014

CPSU-AMIDO-F14S4G46

4 Miembros

8 Guías creadas

Why is the stretchable string for?

dantotford - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 17

Todo El Tiempo: 1,453