Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

JD Razor 2000 Front Wheel Replacement

Introducción

The front wheel of the JD Razor 2000 is located directly underneath the handlebar and T-Bar.

Qué necesitas

  1. JD Razor 2000 Front Wheel Replacement, Removing the 1.75" Axle Bolt: paso 1, imagen 1 de 3 JD Razor 2000 Front Wheel Replacement, Removing the 1.75" Axle Bolt: paso 1, imagen 2 de 3 JD Razor 2000 Front Wheel Replacement, Removing the 1.75" Axle Bolt: paso 1, imagen 3 de 3

    • Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.

    • Using an Allen wrench, unscrew the axle bolt slowly from the right side while applying a constant pressure with your hand on the left side of the bearing.

    • If the left side of the bolt turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving

    • If the bolt does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes.

    • Carefully pull apart the bolt and bearing from either side of the wheel.

    Traducir

  3. JD Razor 2000 Front Wheel Replacement, Removing the Wheel: paso 2, imagen 1 de 1

    • Grip the bottom of the wheel and gently slide it out.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Kaylan Naicker

Miembro Desde 10/14/14

255 Reputación

2 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

Cal Poly, Team 4-46, Amido Fall 2014 Miembro de Cal Poly, Team 4-46, Amido Fall 2014

CPSU-AMIDO-F14S4G46

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 20

Todo El Tiempo: 908