Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

This guide will help you replace a damaged cover and access other components.

Partes

No se especificaron partes.

  1. Locate the seams next to the 'feet' on the bottom side of the device.
    • Locate the seams next to the 'feet' on the bottom side of the device.

  2. Use the metal spudger to gently pry and lift the edge of the seam. The cover is held in place with plastic snaps that will make a popping noise when disengaged. !!Start with the back half, this will expose TWO Screws that need to be removed before lifting the front half. Use the metal spudger to gently pry and lift the edge of the seam. The cover is held in place with plastic snaps that will make a popping noise when disengaged. !!Start with the back half, this will expose TWO Screws that need to be removed before lifting the front half.
    • Use the metal spudger to gently pry and lift the edge of the seam. The cover is held in place with plastic snaps that will make a popping noise when disengaged. !!Start with the back half, this will expose TWO Screws that need to be removed before lifting the front half.

  3. For the first part of the case: gently pull back the edges of the case rotating along the hinge opposite the opening seam illustrated in the second photo. Plastic snaps hold the cover in place. For the second part of the case: there are 2 screws to be removed at the seam. Once removed, the case will come off completely without forcing.
    • For the first part of the case: gently pull back the edges of the case rotating along the hinge opposite the opening seam illustrated in the second photo. Plastic snaps hold the cover in place.

    • For the second part of the case: there are 2 screws to be removed at the seam. Once removed, the case will come off completely without forcing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

Benny Huynh

Miembro Desde 15/02/17

1,482 Reputación

4 Guías creadas

Equipo

USF Tampa, Team 1-1, Sullivan Spring 2017 Miembro de USF Tampa, Team 1-1, Sullivan Spring 2017

USFT-SULLIVAN-S17S1G1

4 Miembros

18 Guías creadas

Can you fix my cover on speaker

c_pg08 - Contestar

where can I find a new cover for xtreme 2, if possible in black?

vale0501 - Contestar

If you find a place to buy a cover let me know

abjayaman -

you forgot about 2 screws

Enescu Catalin - Contestar

zapomniałeś o śrubach osoby które o tym mogły nie wiedzieć mogły urwać plastikowy haczyk który utrzymuje przód

megakacper11 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 7

Ultimos 7 días: 82

Ultimos 30 días: 277

Todo El Tiempo: 21,777