Repara tus cosas Comunidad Tienda

JBL Xtreme Bass Radiator Replacement

Introducción

This guide will show you how to remove a bass radiator from a JBL Xtreme Speaker. Removing these radiators is required if they become damaged and will also be necessary to access certain components inside the speaker.

Qué necesitas

  1. JBL Xtreme Bass Radiator Replacement, Cover: paso 1, imagen 1 de 1

    • Locate the seams next to the 'feet' on the bottom side of the device.

    Traducir

  2. JBL Xtreme Bass Radiator Replacement: paso 2, imagen 1 de 2 JBL Xtreme Bass Radiator Replacement: paso 2, imagen 2 de 2

    • Use the metal spudger to gently pry and lift the edge of the seam. The cover is held in place with plastic snaps that will make a popping noise when disengaged. !!Start with the back half, this will expose TWO Screws that need to be removed before lifting the front half.

    Traducir

  4. JBL Xtreme Bass Radiator Replacement: paso 3, imagen 1 de 2 JBL Xtreme Bass Radiator Replacement: paso 3, imagen 2 de 2

    • For the first part of the case: gently pull back the edges of the case rotating along the hinge opposite the opening seam illustrated in the second photo. Plastic snaps hold the cover in place.

    • For the second part of the case: there are 2 screws to be removed at the seam. Once removed, the case will come off completely without forcing.

    Traducir

  5. JBL Xtreme Bass Radiator Replacement, Bass Radiator: paso 4, imagen 1 de 3 JBL Xtreme Bass Radiator Replacement, Bass Radiator: paso 4, imagen 2 de 3 JBL Xtreme Bass Radiator Replacement, Bass Radiator: paso 4, imagen 3 de 3

    • Unscrew the six 9.75mm Phillips head screws holding the bass radiator in place.

    • Three of the five outer screws are indicated in the first image and the sixth inner screw is indicated in the second image.

    Traducir

  6. JBL Xtreme Bass Radiator Replacement: paso 5, imagen 1 de 3 JBL Xtreme Bass Radiator Replacement: paso 5, imagen 2 de 3 JBL Xtreme Bass Radiator Replacement: paso 5, imagen 3 de 3

    • Once the screws have been removed, the bass radiator will easily lift free.

    • Both radiators are identical. Repeat the above steps on the opposite radiator if necessary.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

12 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Benny Huynh

Miembro Desde 02/15/17

1,929 Reputación

4 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

USF Tampa, Team 1-1, Sullivan Spring 2017 Miembro de USF Tampa, Team 1-1, Sullivan Spring 2017

USFT-SULLIVAN-S17S1G1

4 Miembros

27 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 10

Ultimos 30 días: 62

Todo El Tiempo: 20,567