Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Akkufach mit 8 Schrauben lösen. Akku entfernen. Loch bohren. Löcher wegen der Luftdichtigkeit mit Heißkleber verschließen.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Anschlüsser + und - verlöten. Zur Stromversogung einen DC Hohlbuchse 5.5 x 2.1 verwenden. Kabelenden Isolieren.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Akku 8,4 Volt. 13200mAh 8,4V Akku Batterie-Pack Ladegeraet für Fahrradlampe-XML-T6
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Solarstorm 2S2P 18650 Battery Case.
-
4xPanasonic NCR18650B 3,7V 3400mAh=14400 mAh
-
+ 5V USB ON/OFF Button
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
6 comentarios
hi
step 2: unscrew the screws …. thats th point, where are the screws. the body looks like glued.
Hi.
Don’t ask me, because I have this guide only translated not created. Try to contact the author on de.ifixit.com. I have translated it so, that I tried to don’t change the original text.
Martin
I didn’t get it quite clear: is there a original battery replacement or an improvised one? I am interested in replacing mine but I didn’t find the battery.
Hi.
See the comment higher.
Martin Kubica