Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

JBL Pulse 3 LED Light Display Replacement

Qué necesitas

  1. JBL Pulse 3 LED Light Display Replacement, Speaker Grill: paso 1, imagen 1 de 1
    • Lay the JBL Pulse 3 on its side as shown in the picture.

    • Use a plastic opening tool to lift the top right corner of the speaker grill. A small amount of force is necessary to remove the grill.

  2. JBL Pulse 3 LED Light Display Replacement: paso 2, imagen 1 de 1
    • Repeat step 1 for bottom right corner of speaker grill.

  3. JBL Pulse 3 LED Light Display Replacement: paso 3, imagen 1 de 2 JBL Pulse 3 LED Light Display Replacement: paso 3, imagen 2 de 2
    • After pulling the right side of the grill off, place thumb underneath grill as shown in the picture.

    • Lift and pull straight out to pull grill off the posts.

    • Repeat steps 1-3 for the left side of the speaker grill on the JBL Pulse 3. The speaker grill should now be completely removed from the JBL Pulse 3.

  4. JBL Pulse 3 LED Light Display Replacement, Outside Casing: paso 5, imagen 1 de 2 JBL Pulse 3 LED Light Display Replacement, Outside Casing: paso 5, imagen 2 de 2
    • Use a Phillips #00 screwdriver to remove the six black 6mm screws on the inside of the top of the bottom section.

  5. JBL Pulse 3 LED Light Display Replacement: paso 6, imagen 1 de 2 JBL Pulse 3 LED Light Display Replacement: paso 6, imagen 2 de 2
    • Turn the JBL Pulse 3 right-side up and unscrew the top ring of the device. A small amount of force and/or a cotton cloth may be necessary to remove this piece.

  6. JBL Pulse 3 LED Light Display Replacement: paso 7, imagen 1 de 2 JBL Pulse 3 LED Light Display Replacement: paso 7, imagen 2 de 2
    • Remove the six 5mm screws on top of the JBL Pulse 3 with a Phillips #0 screwdriver.

  7. JBL Pulse 3 LED Light Display Replacement: paso 8, imagen 1 de 1
    • Pull off the top disc of the JBL Pulse 3.

  8. JBL Pulse 3 LED Light Display Replacement: paso 9, imagen 1 de 2 JBL Pulse 3 LED Light Display Replacement: paso 9, imagen 2 de 2
    • Remove the five 7mm screws on the inside of the JBL Pulse 3 with a Phillips #1 screwdriver.

  9. JBL Pulse 3 LED Light Display Replacement: paso 10, imagen 1 de 2 JBL Pulse 3 LED Light Display Replacement: paso 10, imagen 2 de 2
    • Peel off black, taped-on electrical lead from the inside side of the JBL Pulse 3.

  10. JBL Pulse 3 LED Light Display Replacement: paso 11, imagen 1 de 1
    • Pull the top section of the JBL Pulse 3 up. The outside casing to the JBL Pulse 3 should now be removed.

  11. JBL Pulse 3 LED Light Display Replacement, LED Light Display: paso 12, imagen 1 de 3 JBL Pulse 3 LED Light Display Replacement, LED Light Display: paso 12, imagen 2 de 3 JBL Pulse 3 LED Light Display Replacement, LED Light Display: paso 12, imagen 3 de 3
    • Use a Phillips #2 screwdriver to remove the six 11 mm screws that circle the bottom of the LED light display.

    • Pull the LED light display off of the JBL Pulse 3 base.

  12. JBL Pulse 3 LED Light Display Replacement: paso 13, imagen 1 de 2 JBL Pulse 3 LED Light Display Replacement: paso 13, imagen 2 de 2
    • Use tweezers to pull the five connections off of the LED light display.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

4 comentarios

Hello,I really need some code to show me how to initialize and LED display and how to output data from it.Any help is much appreciated.

Osama Siddiq - Contestar

Wow jbl

Gyyzhuahyz8yus

Majd Tom - Contestar

Where to buy the leds?

mj.viana1993 - Contestar

Hello i need an assitance in a LED screen manufacturing

volkanoo - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 21

Todo El Tiempo: 3,072