Saltar al contenido principal

JBL Clip 2 Audio AUX Cord Replacement

Qué necesitas

  1. JBL Clip 2 Audio AUX Cord Replacement, Audio AUX Cord: paso 1, imagen 1 de 1
    • Begin by removing the front cap of the JBL Clip 2 by using the blue plastic opening tool to get in between the creases.

    • If your JBL Clip 2 has never been opened this procedure will require moderate amount of force.

  2. JBL Clip 2 Audio AUX Cord Replacement: paso 2, imagen 1 de 1
    • There will be six 3 mm T8 screws under the cap, remove these six screws. Save

    • If you are not trying to replace the speaker please ignore the two middle 3 mm T8 screws during this procedure.

  3. JBL Clip 2 Audio AUX Cord Replacement: paso 3, imagen 1 de 1
    • The front cover will lift open easily and the components will be visible.

  4. JBL Clip 2 Audio AUX Cord Replacement: paso 4, imagen 1 de 1
    • To completely remove the top portion, disconnect the speaker from the motherboard using the blue plastic opening tool.

    • While disconnecting be sure to not use too much force as these two parts are meant to become disconnected.

  5. JBL Clip 2 Audio AUX Cord Replacement: paso 5, imagen 1 de 1
    • There will be four 3 mm T8 screws holding the motherboard in place, remove these four screws.

  6. JBL Clip 2 Audio AUX Cord Replacement: paso 6, imagen 1 de 1
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Michael Hong

Miembro Desde 02/01/17

1,014 Reputación

5 Guías creadas

Equipo

UW Tacoma, Team 2-2, Rose Winter 2017 Miembro de UW Tacoma, Team 2-2, Rose Winter 2017

UWT-ROSE-W17S2G2

4 Miembros

7 Guías creadas

Un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 7

Ultimos 30 días: 19

Todo El Tiempo: 3,590