Repara tus cosas Comunidad Tienda

Ivation IVWPDC20Y Buttons Replacement

Introducción

This guide will show how to replace the buttons on the top of the camera.

Qué necesitas

  1. Ivation IVWPDC20Y Buttons Replacement, Buttons: paso 1, imagen 1 de 1

    • With the H2.0 bit screwdriver, remove the two screws on the yellow waterproof cover

    Editar

  2. Ivation IVWPDC20Y Buttons Replacement: paso 2, imagen 1 de 1

    • Apply a plastic opening tool to each of the corners and gently remove the casing

    • The front casing is held down by adhesive and may require additional work to remove

    • Apply just enough force to undo the inner latches to make sure not to damage the waterproof seal

    Editar

  3. Ivation IVWPDC20Y Buttons Replacement: paso 3, imagen 1 de 1

    • Remove the five silver screws from the inner casing using the PH00 screwdriver bit

    Editar

  4. Ivation IVWPDC20Y Buttons Replacement: paso 4, imagen 1 de 1

    • Remove the six screws from the edge of the clear inner casing with the PH00 screwdriver bit

    • These screws are very small and easy to strip so apply consistent pressure when removing them

    Editar

  5. Ivation IVWPDC20Y Buttons Replacement: paso 5, imagen 1 de 1

    • Pry off back outer casing using the black spudger or the blue prying tools

    Editar

  7. Ivation IVWPDC20Y Buttons Replacement: paso 6, imagen 1 de 1

    • Remove the five silver screws from the inner casing using the PH00 screwdriver bit

    Editar

  8. Ivation IVWPDC20Y Buttons Replacement: paso 7, imagen 1 de 1

    • Carefully remove the screen from the silver casing using a prying tool or the black spudger

    • There is adhesive in the center of the screen, be sure not to bend it when applying pressure

    Editar

  9. Ivation IVWPDC20Y Buttons Replacement: paso 8, imagen 1 de 1

    • Remove three screws holding the silver screen casing to the motherboard using the PH00 bit screwdriver

    Editar

  10. Ivation IVWPDC20Y Buttons Replacement: paso 9, imagen 1 de 1

    • Remove three screws holding the motherboard into the casing using the PH00 bit screwdriver bit

    Editar

  11. Ivation IVWPDC20Y Buttons Replacement: paso 10, imagen 1 de 1

    • Gently lift the corner of the motherboard out

    • Everything should come out as one component free of the casing

    Editar

  12. Ivation IVWPDC20Y Buttons Replacement: paso 11, imagen 1 de 1

    • Use the metal prying tool to lift off the cover of the buttons

    Editar

  13. Ivation IVWPDC20Y Buttons Replacement: paso 12, imagen 1 de 1

    • Use the PH00 bit to remove the four screws on the metal plate around the buttons

    Editar

  14. Ivation IVWPDC20Y Buttons Replacement: paso 13, imagen 1 de 1

    • Finally, use the plastic spudger to push buttons out, and then replace them

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Alex

Miembro Desde 02/08/16

228 Reputación

2 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

USF Tampa, Team 6-6, Eyestone Spring 2016 Miembro de USF Tampa, Team 6-6, Eyestone Spring 2016

USFT-EYESTONE-S16S6G6

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 356