Introducción

If your record/stop switch is not working follow this guide to replace it.

Partes

No se requieren partes.

  1. Remove the six screws (3 mm) that secure the lens cover bezel with a #00 Phillips screwdriver.
    • Remove the six screws (3 mm) that secure the lens cover bezel with a #00 Phillips screwdriver.

  2. Remove the blue securing the lens cover. Then simply pull off the lens cover itself.
    • Remove the blue securing the lens cover. Then simply pull off the lens cover itself.

    • Remove black aluminum casing as shown.

    • Using a #00 Phillips screwdriver, unscrew the screw securing the record/stop switch.

    • Remove the record/stop switch. You are then able to replace the switch.

    • Be careful to not misplace the power button and spring that will no longer be secured when the switch is removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

UW Stout, Team S6-G2, Ogden Fall 2018 Miembro de UW Stout, Team S6-G2, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G2

4 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 2

Todo El Tiempo: 50