Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Ion Air Pro Power Button Replacement

Qué necesitas

  1. Ion Air Pro Power Button Replacement, Power Button: paso 1, imagen 1 de 1
    • Remove the 6 screws that secure the lens cover bezel with a #00 Phillips screwdriver.

  2. Ion Air Pro Power Button Replacement: paso 2, imagen 1 de 1
    • Slide off the black aluminum casing.

  3. Ion Air Pro Power Button Replacement: paso 3, imagen 1 de 1
    • Unscrew the top screw that is by the power button using a #00 Phillips screwdriver.

    • A spring is being held down by the screw. be sure to hold it down.

  4. Ion Air Pro Power Button Replacement: paso 4, imagen 1 de 1
    • Lift off the plastic part holding the power button in place.

  5. Ion Air Pro Power Button Replacement: paso 5, imagen 1 de 1
    • Remove the power button from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

UW Stout, Team S6-G2, Ogden Fall 2018 Miembro de UW Stout, Team S6-G2, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G2

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 470