Introducción

Is your camera not turning on or turning off? Consider using this guide to replace the power button of your device.

Partes

No se requieren partes.

  1. Remove the 6 screws that secure the lens cover bezel with a #00 Phillips screwdriver.
    • Remove the 6 screws that secure the lens cover bezel with a #00 Phillips screwdriver.

  2. Slide off the black aluminum casing.
    • Slide off the black aluminum casing.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Unscrew the top screw that is by the power button using a #00 Phillips screwdriver.
    • Unscrew the top screw that is by the power button using a #00 Phillips screwdriver.

    • A spring is being held down by the screw. be sure to hold it down.

  5. Lift off the plastic part holding the power button in place.
    • Lift off the plastic part holding the power button in place.

  6. Remove the power button from the device.
    • Remove the power button from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

UW Stout, Team S6-G2, Ogden Fall 2018 Miembro de UW Stout, Team S6-G2, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G2

4 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 8

Todo El Tiempo: 82