Saltar al contenido principal

Ion Air Pro Lens Cover Removal

Qué necesitas

  1. Ion Air Pro Lens Cover Removal, Lens Cover: paso 1, imagen 1 de 1
    • Remove the 6 screws that secure the lens cover bezel with a #00 Phillips screwdriver.

  2. Ion Air Pro Lens Cover Removal: paso 2, imagen 1 de 1
    • Lift the lens cover bezel off of the camera body.

  3. Ion Air Pro Lens Cover Removal: paso 3, imagen 1 de 1
    • Pull lens cover off of the camera body.

    • Be careful to not scratch the camera lens while removing the lens cover.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Equipo

UW Stout, Team S6-G2, Ogden Fall 2018 Miembro de UW Stout, Team S6-G2, Ogden Fall 2018

UWSTOUT-OGDEN-F18S6G2

4 Miembros

5 Guías creadas

Un comentario

Where do I get a lens cover, mine is chipped badly and it shows on the footage. Thanks.

Daniel Moulson - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 449