Installing a Petsafe Removable Dog Panel

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

The Petsafe Dog Panel is a removable dog door that can be installed into the frame of your sliding glass door. Before continuing to the guide, make sure the Petsafe Dog Panel contains all the provided materials and that it is not damaged in any way. Please make sure to pay attention to the warnings before screwing into the panel or your door frame through out the installation process.

Qué necesitas

Paso 1 Petsafe Dog Panel

Installing a Petsafe Removable Dog Panel, Petsafe Dog Panel: paso 1, imagen 1 de 1

Make sure you have all the tools necessary.

Traducir

Paso 2

Receive your PetSafe dog door in the mail.

Traducir

Paso 3

Measure the height of the sliding glass door frame.

Traducir

Paso 4

Installing a Petsafe Removable Dog Panel: paso 4, imagen 3 de 3

Remove your lock latch from the sliding door frame.
Lock latches may vary

Traducir

Paso 5

Slide the top of your dog panel into the top track of the sliding glass door.
Place the bottom portion of the dog panel into the bottom track of the sliding glass door.

Traducir

Paso 6

Measure 12” from the top, down the side of your sliding glass door frame and mark it.
Mark 1” above the pet flap onto the edge of your sliding glass door.

Traducir

Paso 7

Installing a Petsafe Removable Dog Panel: paso 7, imagen 3 de 3

With a 9/64ths drill bit, drill clearance holes into the marks made on the sliding glass door frame
DO NOT GO THROUGH THE DOG PANEL

Traducir

Paso 8

Installing a Petsafe Removable Dog Panel: paso 8, imagen 3 de 3

Fasten the panel to the interior side of the sliding glass frame with the provided ⅝” screws.
MAKE SURE YOU ARE DRILLING OUTSIDE OF THE RIBBED LINE ON THE DOG PANEL.
DO NOT OVERTIGHTEN.