Saltar al contenido principal

Introducción

Hate the look of halogen bulbs? Get rid of the dull yellow with a new set of LED license plate lights. Installation is very easy and will only take you a few minutes.

Herramientas

Partes

No se especificaron partes.

  1. Take a flat head screwdriver and remove the license plate housing cover. Take a flat head screwdriver and remove the license plate housing cover.
    • Take a flat head screwdriver and remove the license plate housing cover.

  2. Remove the bulb housing.
    • Remove the bulb housing.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Remove the stock license plate bulb. Remove the stock license plate bulb.
    • Remove the stock license plate bulb.

  5. Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees. Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees.
    • Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees.

  6. Put everything back the same way it was removed. Put everything back the same way it was removed. Put everything back the same way it was removed.
    • Put everything back the same way it was removed.

Conclusión

You can see from these instructions that installation was very easy. Enjoy your new LED license plate lights.

5 personas más completaron esta guía.

Eric Wu

Miembro Desde 21/01/15

2,766 Reputación

23 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 9

Todo El Tiempo: 1,073