Repara tus cosas Comunidad Tienda

Insignia Sport NS-4V17 Front Case Cover Replacement

Introducción

Does your case have a crack? Want to clean out some dust or dirt trapped underneath the screen? This guide will help you take the front cover off.

Qué necesitas

  1. Insignia Sport NS-4V17 Front Case Cover Replacement, Battery: paso 1, imagen 1 de 1

    • Remove the 3mm Phillips #00 screw on the back of the Insignia NS-4v17.

    Editar

  2. Insignia Sport NS-4V17 Front Case Cover Replacement: paso 2, imagen 1 de 2 Insignia Sport NS-4V17 Front Case Cover Replacement: paso 2, imagen 2 de 2

    • Detach the back cover by carefully pulling up and out on the back plastic casing.

    • Do not pull apart the red wire connecting the battery to the device.

    Editar

  3. Insignia Sport NS-4V17 Front Case Cover Replacement: paso 3, imagen 1 de 1

    • Use the plastic opening tool to reach underneath the battery, opposite from the side with the red wire, and remove it from its plastic case.

    • Be careful to not tear the wires while opening the case.

    Editar

  5. Insignia Sport NS-4V17 Front Case Cover Replacement: paso 4, imagen 1 de 1

    • Reach under the white plastic wire connector using the plastic opening tool and disconnect it from the socket.

    • Do not disconnect wires from plastic connector.

    Editar

  6. Insignia Sport NS-4V17 Front Case Cover Replacement, Front Case Cover: paso 5, imagen 1 de 2 Insignia Sport NS-4V17 Front Case Cover Replacement, Front Case Cover: paso 5, imagen 2 de 2

    • Remove the four corner plastic covers on the back of the device using the plastic opening tool.

    Editar

  7. Insignia Sport NS-4V17 Front Case Cover Replacement: paso 6, imagen 1 de 1

    • Using a Philips #00 screwdriver remove all four 4.5mm corner screws located underneath the corner pads.

    Editar

  8. Insignia Sport NS-4V17 Front Case Cover Replacement: paso 7, imagen 1 de 3 Insignia Sport NS-4V17 Front Case Cover Replacement: paso 7, imagen 2 de 3 Insignia Sport NS-4V17 Front Case Cover Replacement: paso 7, imagen 3 de 3

    • Carefully wedge the plastic opening tool into either long side of the device.

    • Slowly move the plastic opening tool along the side of the device, separating the front and back case covers.

    • Repeat these steps on the other side of the device.

    Editar

  9. Insignia Sport NS-4V17 Front Case Cover Replacement: paso 8, imagen 1 de 1

    • Once the front cover is loose, use your fingers to remove the front case cover for a new installation.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 5 otros colaboradores

Wesley Ballar

Miembro Desde 04/18/13

88 Reputación

4 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 12-36, Amido Spring 2013 Miembro de Cal Poly, Team 12-36, Amido Spring 2013

CPSU-AMIDO-S13S12G36

4 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 10

Todo El Tiempo: 357