Saltar al contenido principal

Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement

Qué necesitas

  1. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement, Bluetooth Button: paso 1, imagen 1 de 1
    • Remove the rubber sleeve.

  2. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: paso 2, imagen 1 de 2 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: paso 2, imagen 2 de 2
    • Remove 4 screws from the green, plastic button cover.

  3. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: paso 3, imagen 1 de 2 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: paso 3, imagen 2 de 2
    • After successfully removing the plastic cover, use a sauter against the bluetooth button. The heat will make the removal of the button easy.

    • Place the new bluetooth button in the place of the old bluetooth button and mend the button into place using heat.

  4. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: paso 5, imagen 1 de 3 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: paso 5, imagen 2 de 3 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: paso 5, imagen 3 de 3
    • Screw the 4 screws of the plastic button cover back onto the device.

  5. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: paso 6, imagen 1 de 1
    • Put the plastic sleeve back onto the speaker.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Erin Steele

Miembro Desde 03/08/17

649 Reputación

5 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 58