Saltar al contenido principal

Insignia NS-HD01A Battery Replacement

Qué necesitas

  1. Insignia NS-HD01A Battery Replacement, Battery: paso 1, imagen 1 de 1
    • Remove the rubber screw caps using the pointed tip of the Spudger.

  2. Insignia NS-HD01A Battery Replacement: paso 2, imagen 1 de 1
    • Remove the four 6.0 mm Phillips screws located below the rubber caps using the PH00 bit installed in the driver.

  3. Insignia NS-HD01A Battery Replacement: paso 3, imagen 1 de 2 Insignia NS-HD01A Battery Replacement: paso 3, imagen 2 de 2
    • Use the plastic opening tool to pry open the back cover.

    • Slide the tool around the sides of the radio to gradually pry the back cover off. Do not remove the cover completely as there is still a cable connecting it to radio.

  4. Insignia NS-HD01A Battery Replacement: paso 4, imagen 1 de 3 Insignia NS-HD01A Battery Replacement: paso 4, imagen 2 de 3 Insignia NS-HD01A Battery Replacement: paso 4, imagen 3 de 3
    • Use the blunt tweezers to unplug the battery cable from the PCB board. Grab the battery cable plug from the sides.

  5. Insignia NS-HD01A Battery Replacement: paso 5, imagen 1 de 2 Insignia NS-HD01A Battery Replacement: paso 5, imagen 2 de 2
    • Use the flat side of the Spudger to pry the battery out of the back cover.

    • Insert the replacement battery into the back cover.

    • Reassemble the radio, making sure to reconnect the battery cable.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Joel Najmon

Miembro Desde 10/08/16

152 Reputación

1 Guía escrita

Equipo

IUPUI, Team 2-2, Wilson Fall 2016 Miembro de IUPUI, Team 2-2, Wilson Fall 2016

IUPUI-WILSON-F16S2G2

5 Miembros

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 13

Todo El Tiempo: 1,020