Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unplug your fan.
-
Remove the 20 mm bolt that fastens the fan ring located at the bottom of the fan cage with a Phillips #3 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the ring that runs around the edge of the fan cage.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 8 mm bolt fastening the fan blades to the rotor with a Phillip #3 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the four 8 mm bolts that fasten the back of the fan cage back to the motor housing with a Phillips #3 screwdriver.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the 10 mm screw in the center hole of the oscillation knob with a Phillips #3 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use your fingers to gently pull the power knob directly away from the motor housing.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the flat 17 mm nut fastened at the bottom of the power knob with a small crescent wrench.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four 6 mm bolts and small washers that secure the front face of the motor housing with a Phillips #3 screwdriver and remove the washers.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the front face of the motor housing off toward the front of the rotor.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 10 mm triangular-headed bolt with a Phillips #3 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slide the back end of the motor housing away from the front of the rotor.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the small piece of paper hanging on the power button.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.