Introducción
Removing the back of the fan cage provides access to the motor housing.
Qué necesitas
-
-
Unplug your fan.
-
Remove the 20 mm bolt that fastens the fan ring located at the bottom of the fan cage with a Phillips #3 screwdriver.
-
-
-
Remove the front of the fan cage.
Missing details- when removing the fan cage, remind viewer to use both hands to remove the cage to avoid damage to the fan.
-
-
-
-
Remove the 8 mm bolt fastening the fan blades to the rotor with a Phillip #3 screwdriver.
Prefer a picture taken from an upward angle, similar to the step beforehand, to reveal the screw.
Missing detail- remind viewer to use Phillips #2 screw.
I lost this screw and I want to buy it but I don't know the exact size. It says 8mm but that is the length size right?
-
-
-
Unscrew the four 8 mm bolts that fasten the back of the fan cage back to the motor housing with a Phillips #3 screwdriver.
Can also use the Phillips #2 screwdriver or state when using another screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Equipo
CSU Fullerton, Team S2-G1, Bruce Fall 2018 Miembro de CSU Fullerton, Team S2-G1, Bruce Fall 2018
CSUF-BRUCE-F18S2G1
4 Miembros
8 Guías creadas
Missing details- when unscrewing the bottom bolt, add a side note to have the viewer hold both sides and add pressure to unscrew
Aliyah Malapit - Contestar