Repara tus cosas Comunidad Tienda

Insignia NS-CLOPP2 Antenna Replacement

Qué necesitas

  1. Insignia NS-CLOPP2 Antenna Replacement, Antenna: paso 1, imagen 1 de 1

    • Follow steps on removing the motherboard as a prerequisite.

    • Gently move the motherboard back, revealing the thin black wire that is the antenna. The antenna wire is, on the outside, located on the lower, middle back. Follow the wire from the outside to the inside to make sure it's the correct one.

    Traducir

  2. Insignia NS-CLOPP2 Antenna Replacement: paso 2, imagen 1 de 1

    • Pull the wire up, making sure it's connected to the motherboard from the back side. To replace the wire, cut it completely from the motherboard.

    Traducir

  4. Insignia NS-CLOPP2 Antenna Replacement: paso 3, imagen 1 de 1

    • To re-attach the antenna cord to the motherboard, use a soldering tool to connect the wire to the same spot it was originally attached to.

    Traducir

  5. Insignia NS-CLOPP2 Antenna Replacement: paso 4, imagen 1 de 1

    • Make sure the wire is securely in place in the correct area of the clock, labeled "antenna" from the outside.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Dilini De Silva

Miembro Desde 03/11/15

757 Reputación

5 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Marist, Team 1-1, Laflen Spring 2015 Miembro de Marist, Team 1-1, Laflen Spring 2015

MARS-LAFLEN-S15S1G1

2 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 4

Todo El Tiempo: 114