Repara tus cosas Comunidad Tienda

Insignia NS-CLIP02 Speaker replacement and troubleshooting

Introducción

This guide shows how to locate and repair broken connections to the speakers.

Qué necesitas

  1. Insignia NS-CLIP02 Speaker replacement and troubleshooting, Motherboard: paso 1, imagen 1 de 1

    • Set the clock radio on the work space so the bottom of the device is showing.

    Traducir

  2. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 2, imagen 1 de 2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 2, imagen 2 de 2

    • Use a metal spudger to peel back the adhesive sticker on the bottom of the clock.

    • You should see a single screw beneath the sticker.

    Traducir

  3. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 3, imagen 1 de 2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 3, imagen 2 de 2

    • Using a plastic opening tool, peel off the adhesive gel stoppers.

    Traducir

  4. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 4, imagen 1 de 1

    • Use a Phillips screwdriver to remove the six 11 mm screws on the bottom of the device.

    Traducir

  5. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 5, imagen 1 de 1

    • Remove the bottom cover from the device to reveal the motherboard.

    Traducir

  6. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 6, imagen 1 de 1

    • Use a Phillips screwdriver to remove the 9.5 mm screw located near the center of the motherboard.

    Traducir

  8. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 7, imagen 1 de 1

    • Lift the motherboard away from the device.

    Traducir

  9. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 8, imagen 1 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 8, imagen 2 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 8, imagen 3 de 3

    • Disconnect the four cables connecting the motherboard to the device.

    Traducir

  10. Insignia NS-CLIP02 Speaker replacement and troubleshooting, Speaker: paso 9, imagen 1 de 1

    • Remove the three screws located along the center of the base.

    Traducir

  11. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 10, imagen 1 de 2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 10, imagen 2 de 2

    • Remove the base from the display.

    Traducir

  12. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 11, imagen 1 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 11, imagen 2 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 11, imagen 3 de 3

    • Using a metal spudger, remove the plastic face plate from the display.

    Traducir

  13. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 12, imagen 1 de 1

    • With a phillips screwdriver, remove the six screws shown pictured to the left.

    Traducir

  14. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 13, imagen 1 de 2 Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 13, imagen 2 de 2

    • Using the metal spudger, pry the speaker grilles from the display.

    Traducir

  15. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 14, imagen 1 de 1

    • Using the phillips screwdriver, remove the four screws pictured to the left.

    Traducir

  16. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 15, imagen 1 de 1

    • Separate the two pieces of the display as shown.

    Traducir

  17. Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 16, imagen 1 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 16, imagen 2 de 3 Insignia NS-CLIP02 Speaker replacement and troubleshooting: paso 16, imagen 3 de 3

    • You can see that there are several points where connections to the speaker are soldered.

    • If all connections are soldered then replacement may be necessary.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Aubrey

Miembro Desde 02/24/15

214 Reputación

2 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

USF Tampa, Team 9-3, Leahy Winter 2015 Miembro de USF Tampa, Team 9-3, Leahy Winter 2015

USFT-LEAHY-W15S9G3

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 166