Repara tus cosas Comunidad Tienda

Insignia NS-24ER310NA17 Speaker Replacement

Escrito Por: Hannah Berenjfoorosh (y otros 2 participantes)
  • Comentarios: 0
  • Favoritos: 1

Dificultad

Moderado

Pasos

10

Tiempo Requerido

10 minutos

Secciones

2

Banderas

0

Introducción

This guide will take you through the process of replacing speakers in an Insignia TV.

Herramientas

Partes

  1. Place the TV face down so you have access to the back.

    • Place the TV face down so you have access to the back.

    Editar

  2. Rest the TV on its top edge so you have access to the base. Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base. Remove the base from the frame.

    • Rest the TV on its top edge so you have access to the base.

    • Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.

    • Remove the base from the frame.

    Editar

  3. Lay the TV face down. Use the Phillips 00 Screwdriver to remove all of the Phillips Head Screws from the the backside of the TV.

    • Lay the TV face down.

    • Use the Phillips 00 Screwdriver to remove all of the Phillips Head Screws from the the backside of the TV.

    Editar

  4. Stand the TV on its top edge.

    • Stand the TV on its top edge.

    • Gently pry apart the front and back of the TV.

    • The two halves should pull apart easily since there are no longer any screws holding it together.

    Editar

  6. There are wires still connecting the two halves. Remove all the pieces of tape to detach the wires from both sides. Remove all the pieces of tape to detach the wires from both sides.

    • There are wires still connecting the two halves.

    • Remove all the pieces of tape to detach the wires from both sides.

    Editar

  7. Completely pry apart your TV.

    • Completely pry apart your TV.

    • You should have a clear view of the inside on both sides.

    Editar

  8. Unplug the red (right speaker) cord from the motherboard. Unplug the white (left speaker) cord from the motherboard.

    • Unplug the red (right speaker) cord from the motherboard.

    • Unplug the white (left speaker) cord from the motherboard.

    Editar

  9. Start by locating speaker in bottom of back panel.

    • Start by locating speaker in bottom of back panel.

    Editar

  10. Remove screws on both sides holding the speaker in place.

    • Remove screws on both sides holding the speaker in place.

    Editar

  11. Pull the speaker out of its casing, and repeat for the process for the other speaker.

    • Pull the speaker out of its casing, and repeat for the process for the other speaker.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Hannah Berenjfoorosh

Miembro Desde 22/01/18

503 Reputación

3 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team S16-G2, Banghart Winter 2018 Miembro de Cal Poly, Team S16-G2, Banghart Winter 2018

CPSU-BANGHART-W18S16G2

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 8

Todo El Tiempo: 569