Repara tus cosas Comunidad Tienda

Insignia NS-24ER310NA17 Motherboard Replacement

Escrito Por: Maggie Kuntz (y otros 5 participantes)
  • Comentarios: 0
  • Favoritos: 1
  • Terminaciones: 6

Dificultad

Moderado

Pasos

16

Tiempo Requerido

10 minutos

Secciones

2

Banderas

2

Needs Better Images

Necesita mejores imágenes

Mejores fotos mejorarán esta guía. Ayuda tomando, editando o subiendo nuevas imágenes!

Better Introduction

Mejor introducción

Mejora esta guía completando o revisando su introducción.

Introducción

This guide shows you how to remove a faulty motherboard (also known as a main board) from your Insignia NS-24ER310NA17. To replace it, insert a new motherboard by following the directions in reverse order. This should fix display issues such as half the image being black or lines running across the screen.

Herramientas

Partes

No se especificaron partes.

  1. Place the TV face down so you have access to the back.

    • Place the TV face down so you have access to the back.

    Traducir

  2. Rest the TV on its top edge so you have access to the base. Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base. Remove the base from the frame.

    • Rest the TV on its top edge so you have access to the base.

    • Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.

    • Remove the base from the frame.

    Traducir

  3. Lay the TV face down. Use the Phillips 00 Screwdriver to remove all of the Phillips Head Screws from the the backside of the TV.

    • Lay the TV face down.

    • Use the Phillips 00 Screwdriver to remove all of the Phillips Head Screws from the the backside of the TV.

    Traducir

  4. Stand the TV on its top edge.

    • Stand the TV on its top edge.

    • Gently pry apart the front and back of the TV.

    • The two halves should pull apart easily since there are no longer any screws holding it together.

    Traducir

  5. There are wires still connecting the two halves. Remove all the pieces of tape to detach the wires from both sides. Remove all the pieces of tape to detach the wires from both sides.

    • There are wires still connecting the two halves.

    • Remove all the pieces of tape to detach the wires from both sides.

    Traducir

  6. Completely pry apart your TV.

    • Completely pry apart your TV.

    • You should have a clear view of the inside on both sides.

    Traducir

  8. Remove all strips of tape attached to the silver steel rectangular piece.

    • Remove all strips of tape attached to the silver steel rectangular piece.

    Traducir

  9. Pull the red wire out from under the black plastic clip.

    • Pull the red wire out from under the black plastic clip.

    Traducir

  10. Unscrew the four screws surrounding the steel rectangle with a Phillips 00 Screwdriver. Unscrew the four screws surrounding the steel rectangle with a Phillips 00 Screwdriver.

    • Unscrew the four screws surrounding the steel rectangle with a Phillips 00 Screwdriver.

    Traducir

  11. Carefully lift the rectangular piece.

    • Carefully lift the rectangular piece.

    Traducir

  12. The rectangular piece will still be attached to the motherboard beneath it with a strip of tape. Remove this strip of tape.

    • The rectangular piece will still be attached to the motherboard beneath it with a strip of tape. Remove this strip of tape.

    Traducir

  13. Use a Phillips #00 screwdriver to remove the two screws on both sides of the motherboard. Use a Phillips #00 screwdriver to remove the two screws on both sides of the motherboard.

    • Use a Phillips #00 screwdriver to remove the two screws on both sides of the motherboard.

    Traducir

  14. Carefully lift the motherboard away from the television.

    • Carefully lift the motherboard away from the television.

    • Keep in mind that the motherboard is still attached by several thin wires and should not be tugged.

    Traducir

  15. There are 5 wires attached to the motherboard. Remove the two thicker white wires to the right of the red wire. There are 5 wires attached to the motherboard. Remove the two thicker white wires to the right of the red wire. There are 5 wires attached to the motherboard. Remove the two thicker white wires to the right of the red wire.

    • There are 5 wires attached to the motherboard. Remove the two thicker white wires to the right of the red wire.

    Traducir

  16. Remove the remaining three wires from the mainboard. Remove the remaining three wires from the mainboard. Remove the remaining three wires from the mainboard.

    • Remove the remaining three wires from the mainboard.

    Traducir

  17. Carefully remove the mainboard from the television.

    • Carefully remove the mainboard from the television.

    • You have now successfully removed the mainboard.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Autor

con 5 otros colaboradores

Maggie Kuntz

Miembro Desde 22/01/18

301 Reputación

1 Guía escrita

Insignias: 6

+ 3 más insignias

Equipo

Cal Poly, Team S16-G2, Banghart Winter 2018 Miembro de Cal Poly, Team S16-G2, Banghart Winter 2018

CPSU-BANGHART-W18S16G2

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 24

Ultimos 30 días: 112

Todo El Tiempo: 9,661